December $487 prefit group buy???

[RockAndSage]

.062 like a wylde is pretty common and what I’d want

In a 7 twist I’d want atleast that to run 77-88 grain bullets

I'll need to be loading this ammo so that it works in ARs and AR mags too, so no throat lengths that require a longer loading.

 

[Lawnboi]

I'll need to be loading this ammo so that it works in ARs and AR mags too, so no throat lengths that require a longer loading.

A wylde length throat should work for that while also working well with 75-80 grain bullets. I have a couple thousand 88s and 85.5s I need to shoot. The 223 project that was that ended with a bum barrel.

 

[Hypernatremia]

Perfect. Well in that case put me down as a request for

Cartridge 6 prc - NSI reamer
Throat .180 FB
Length 20
Twist 1-7.5

Put me down for one of these

 

[TimberHunter]

223 AI with 7 twist could be interesting… for say an 18” barrel, what could one expect velocity wise with the 80’s or 88’s?

I have a factory 1:8 223 16” and 77’a shoot well out to 500/600 at 2740fps. Wind starts pushing them around past that

And what’s your guys plan for the magazines?


Sent from my iPhone using Tapatalk

 

[Dsousa90]

OK, here is the deal. I get lots of requests for different calibers and different lengths on Tikka actions. It is especially hot now that I have a sale going on. I have discussed this with Preferred, and we can get any barrel group buy into their production.

The masses want 22 and 6 creedmoor in 16 and 18". For those that want anything else, here is the opportunity. If you get 4 or 5 for any particular single barrel, I will put up a listing in the store for $487 (plus or minus features) plus tax and shipping.

Plead with your fellow Roksliders to create a group buy for the prefit you want. In your comment below, the FIRST PERSON to name a barrel spec can copy and paste the SECTION BETWEEN THE LINES WITH WHAT YOU WANT and complete it. All the following people can then reply to that comment that they will buy one AND COUNT OFF with how many people want one.

For each barrel all these options have to be the same:
____________________________________________________
$487 for a Tikka Hybrid Lite contour threaded 5/8 x 24.
SPECIFICATIONS
Cartridge
Throat
Length
Twist
Lapped (add$58)
12" helical fluting (add $138)
No threads/light contour (subtract $62)
____________________________________________________

@dirtytough wants 20" or 22" 6 Creedmoor, so I am going to make TWO comments and see who else might like a 20" or 22" Tikka 6 creed. Follow the pattern, please.

OK, here is the deal. I get lots of requests for different calibers and different lengths on Tikka actions. It is especially hot now that I have a sale going on. I have discussed this with Preferred, and we can get any barrel group buy into their production.

The masses want 22 and 6 creedmoor in 16 and 18". For those that want anything else, here is the opportunity. If you get 4 or 5 for any particular single barrel, I will put up a listing in the store for $487 (plus or minus features) plus tax and shipping.

Plead with your fellow Roksliders to create a group buy for the prefit you want. In your comment below, the FIRST PERSON to name a barrel spec can copy and paste the SECTION BETWEEN THE LINES WITH WHAT YOU WANT and complete it. All the following people can then reply to that comment that they will buy one AND COUNT OFF with how many people want one.

For each barrel all these options have to be the same:
____________________________________________________
$487 for a Tikka Hybrid Lite contour threaded 5/8 x 24.
SPECIFICATIONS
Cartridge
Throat
Length
Twist
Lapped (add$58)
12" helical fluting (add $138)
No threads/light contour (subtract $62)
____________________________________________________

@dirtytough wants 20" or 22" 6 Creedmoor, so I am going to make TWO comments and see who else might like a 20" or 22" Tikka 6 creed. Follow the pattern, please.

Any .22 creed barrels already spun up by chance?