Savage short action: accu stock, accu trigger, bottom bolt release
Green Mountain blank: cut by Apache Gun Works, 6.5 Grendel, 22”, 1:9 twist, small shank, sporter profile, recessed crown, reamer used .294 neck/.167 freebore length
Northland Shooter Supply: barrel nut wrench, action wrench, recoil lug, small shank barrel nut
DNZ one piece scope mount, #20200
Brownells 6.5 Grendel go/no go gauges #513-000-101
This project started as a stock 7.62x39 Savage, back before there were commercially available Grendel bolt guns. I put this together, and it shoots great. I believe it needs a PPC bolt head for proper feeding/extraction. I’ve disassembled as I’m not a gunsmith and the next owner may chose to do what they want.
Prefer to sell as a lot, but may make an exception in limited circumstances.
$550
Green Mountain blank: cut by Apache Gun Works, 6.5 Grendel, 22”, 1:9 twist, small shank, sporter profile, recessed crown, reamer used .294 neck/.167 freebore length
Northland Shooter Supply: barrel nut wrench, action wrench, recoil lug, small shank barrel nut
DNZ one piece scope mount, #20200
Brownells 6.5 Grendel go/no go gauges #513-000-101
This project started as a stock 7.62x39 Savage, back before there were commercially available Grendel bolt guns. I put this together, and it shoots great. I believe it needs a PPC bolt head for proper feeding/extraction. I’ve disassembled as I’m not a gunsmith and the next owner may chose to do what they want.
Prefer to sell as a lot, but may make an exception in limited circumstances.
$550
