WTS Benchmark 7mm Rem Mag in Christensen MPR

Status
Not open for further replies.

Chase723

FNG
Rating - 0%
0   0   0
Joined
Sep 14, 2019
Messages
27
While I love this rifle, it has to go. Benchmark Rem 700 stainless LA barreled action. Benchmark Barrels did all the fitting/gunsmithing. Trued the action, put on a tactical bolt knob, etc. Matte finish, stainless, straight taper 1:9 twist 22”, threaded 5/8x24. TriggerTech primary curved set at 1.5lbs. Sent the bolt to LRI and had their M16 extractor installed. Has ~350 rounds down the pipe. I literally just put it in a Christensen MPR chassis and haven’t shot it since I put it in it. (I can though if you would like). I have loaded the mag though several times and cycled it. Runs flawlessly.

This chassis is actually really nice. It's lightweight, the carbon fiber is super nice when it's cold/hot out, it folds to the right over the bolt handle making it very compact which is nice for putting in/on a pack, and the folding mechanism is exceptional. Locks up tight and is held folded by a small magnet.

Was in a Manners T2 previously and it shoots lights out. See groups below. The one with the orange circle in the middle was 960 yards w/ L-->R 12-18mph wind. The target is 12”x20”. The plates were 3 shot groups at 500. Loves 69gr Retumbo behind a 168gr Berger VLD. Runs at 3024. Also liked 69.5gr H1000. Will come with 1-5 round magazine. Does NOT come with scope, bipod, or muzzle brake. Rifle only.

PM me with any other questions. This has been an incredible rifle but I just bought/did my first full custom build so it has to go. Great long range set up.

$1450 shipped for the rifle only. $1600 shipped with RCBS dies and ~200 pieces of brass.

Will split up and sell barreled action for $800, chassis for $800.

Will trade for a ZCO 4-20 with $2K on my end. Will trade straight across for a new Mausingfield (M7 w/ 83 deg bolt throw, DLC, etc) or Annealing Made Perfect machine with Aztec & AMP mate. Will consider partial trades for manners EH1A or PRS2 (raw carbon or swamp) for Rem 700 SA, Spuhr 6001, Trigger Tech Diamond flat shoe, or combination thereof with cash on your end.
 

Attachments

  • 0E54040C-871F-448C-B084-7FB8DCBB0153.jpeg
    0E54040C-871F-448C-B084-7FB8DCBB0153.jpeg
    246.5 KB · Views: 106
  • 6FB6D390-07D6-48D4-938C-0CD25430C955.jpeg
    6FB6D390-07D6-48D4-938C-0CD25430C955.jpeg
    320.5 KB · Views: 104
  • 21E2B87D-ED92-4393-A084-017FB93BA2D6.jpeg
    21E2B87D-ED92-4393-A084-017FB93BA2D6.jpeg
    267.5 KB · Views: 98
  • 6C3032C2-4F24-48CD-B421-FC6FD114904C.jpeg
    6C3032C2-4F24-48CD-B421-FC6FD114904C.jpeg
    357.8 KB · Views: 102
  • D3FDFC87-B2D3-4183-9D03-6D8B56C80306.jpeg
    D3FDFC87-B2D3-4183-9D03-6D8B56C80306.jpeg
    363.6 KB · Views: 136
  • D1BDF184-F55E-46A3-B84D-F5E3D5DF9801.jpeg
    D1BDF184-F55E-46A3-B84D-F5E3D5DF9801.jpeg
    238.3 KB · Views: 137
Last edited:
Status
Not open for further replies.
Top