are these ok for my reloading setup? Hornday ELD-X 150gr

[CamaroMan]

Finally found some bullets after a craigslister dropped me.. 7mm RM and plan to hunt deer and maybe larger down the road.

Have Vihtavourt n160 powder and cci 250 large primer primers-

Will these fit the bill?

Hornady ELD-X Bullets Polymer Tip Boat Tail​

 

[CamaroMan]

forgot to add i got them in 150 grain- here is the data for the powder

here is the load data

https://www.vihtavuori.com/reloading-data/rifle-reloading/?cartridge=74

Bullet	9,7 g / 150 gr	Lapua, Scenar-L	C.O.L. 83,5 mm / 3.287 inch
Powder	Starting load	Maximum load
Type	Weight	Velocity	Weight	Velocity
[g]	[grs]	[m/s]	[fps]	[g]	[grs]	[m/s]	[fps]
N160	3,27	50.5	794	2605	3,87	59.7	893	2930
N165	3,72	57.4	820	2690	4,28	66.1	925	3035
N560	3,86	59.6	847	2779	4,32	66.7	951	3120
Bullet	9,7 g / 150 gr	Nosler, Partition	C.O.L. 83,5 mm / 3.287 inch
Powder	Starting load	Maximum load
Type	Weight	Velocity	Weight	Velocity
[g]	[grs]	[m/s]	[fps]	[g]	[grs]	[m/s]	[fps]
N160	3,53	54.5	824	2703	3,94	60.8	912	2992
N165	3,82	59.0	847	2779	4,32	66.7	931	3054
N560	3,89	60.0	851	2792	4,35	67.1	948	3110

 

[Dopedude]

Hornady does not list that powder in their manual for 7rm with a 150ish grain. They list N165 and N560 for that class bullet.

 

[Wapiti1]

The short answer is yes, that combination will work. It won't quite get the top speeds the 7mmRM is capable of, but is close enough. You may find the ELD-X a bit explosive on deer, so keep your shots behind the shoulder.

Jeremy