A few gel tests

[Mule3006Elk]

ELD-M is impressive. How much meat loss with a shot that is not a meat saver shot?
Never used this bullet but it looks like there could be a fair amount of meat loss.
Maybe I'm wrong?

Curious what a terminal ascent bullet wound cavity would look like. I've had good luck with them thus far.

 

[eoperator]

Impressive amount of damage from the 22cal. Thanks for testing/sharing.

Surprisingly similar to larger calibers just scaled down version.

 

[eoperator]

I had to retest the 73g eldm it was bothering me. I used the same charge weight as before but did not check actual velocity. Seems to be very similar to 77tmk performance.

@SouthPaw

 

[dla]

This is where it takes some understanding about reading gel blocks. The gel shows the whole temporary cavity, not the true crush cavity that is permanent. The 77gr TMK, 103gr ELD-X, and 108gr ELD-M are similar with the 6mm’s producing a slightly larger wound channel. The 100gr TGK however produces a measurably and noticeably narrower wound channel than the other three.





Blackhills has gel shots with the 77gr TMK on their website. I will look to see if any of the others are public.

I was rooting around on Blackhills site and couldn't find any gel test data.

 

[Formidilosus]

I was rooting around on Blackhills site and couldn't find any gel test data.

5.56mm | Black Hills Ammunition

www.black-hills.com

Go there and scroll through the pics. It’s from a 14.5” barrel at around 2,650fps impact velocity.

 

[Phinehas25]

Black hills 77 tmk test shows very similar penetration to eoperator's.

 

[Formidilosus]

Black hills 77 tmk test shows very similar penetration to eoperator's.

Yes, the issue is that EOperators is at 200 fps lower impact velocity.

 

[Phinehas25]

1920 fps according to Black Hills Ammo

 

[eoperator]

Thought I would post 17hmr I did awhile back
17hmr 20g hp 100yrds. Pretty much zero expansion.

 

[eoperator]

17hmr 17g vmax 100yrds good expansion

 

[eoperator]

Measurements are jacket thickness

 

[eoperator]

 

[Alex Genereux]

I see you have the 7mm 175 gr eldx in your jacket thickness. Are you going to be gel testing it soon?

 

[eoperator]

I see you have the 7mm 175 gr eldx in your jacket thickness. Are you going to be gel testing it soon?

I am not going to do any more gel stuff until fall when I have more time and ouside temperature is 30-40deg. I am going to test 7mm 175eldx, 175eh, 183smk nr. If anyone has a used nose ring cutter for sale let me know.