6.5 PRC bullet

[Jmort1754]

150 ABLR

or

143 bond strike

Norma Brass
Large Rifle primer

seekins havak element

I don't have n565 however can get retumbo.

I do have h1000 and magnum as well as h4350, h100v, 4831sc

 

[WeiserBucks]

Are you interested in any other bullet options?

 

[Jmort1754]

If I can find them I am. I am going by what I can find. What else do you think for options? I am open

 

[WeiserBucks]

I like 140 Bergers myself, they're in stock pretty frequently if you stay on top of things. If was forced to use ABLR's I'd sell the rifle.

 

[Orionthehunter2]

The 156 bergers from unknown munitions are tack drivers out of my 110 ultralight

 

[Jmort1754]

I have 200 pieces of norma brass and 16 lbs of h1000 so I am not sure ill be buying them.

 

[WeiserBucks]

I have 200 pieces of norma brass and 16 lbs of h1000 so I am not sure ill be buying them.

If you're interested, you could send some of your brass to Unknown and have them work up a few test loads with a few different bullets using H1000. Once you decide on a winner, you can duplicate the load yourself. Could be a good way to go if you're going in blind on a new cartridge.

 

[axeforce6]

Are those the two bullets you have available to you? Bonded bullets are harder to tune but can be done. I just did some load development with the 143 Bondstrikes. I got the usual bonded bullet groups until I got to 3000fps, then they grouped really well.

 

[AZ_Hunter_2000]

My 6.5 PRC loves 147 gr ELD-M and 156 gr Bergers.

 

[Jmort1754]

Are those the two bullets you have available to you? Bonded bullets are harder to tune but can be done. I just did some load development with the 143 Bondstrikes. I got the usual bonded bullet groups until I got to 3000fps, then they grouped really well.

what were you loading>?

 

[axeforce6]

what were you loading>?

N565
Lapua Brass
Fed 210M

 

[Jmort1754]

N565
Lapua Brass
Fed 210M

I wonder if i can stuff enough h1000 in there

 

[axeforce6]

H1000 should work really well with 140 class bullets
Hornady shows a starting charge at 51.4 and max at 59.0
Hornady brass/Fed 210 primer

 

[david2duck]

I have the same gun and have had great results with H1000/147eldm’s and N565/156’s.

 

[Fartrell Cluggins]

If I can find them I am. I am going by what I can find. What else do you think for options? I am open

More bullets available here. https://www.shootersproshop.com/shop/in-stock.html?p=2

 

[Jmort1754]

That's where I grabbed the 150 accubombs