Up for sale is my 260 Remington Remage barreled action w/bottom metal. The reason I am selling is that after I built it, I stumbled on a killer deal for a used Tikka T3x Lite SS chambered in 6.5 Creedmoor at my local Cabelas/BPS. I bought it to be a donor, but I made the mistake of shooting it. A few mods and a new stock later, and I end up grabbing that gun more often when I want to hunt or bang steel. This one just sits in my safe.
This one started life as a Walmart special ADL with a 243 barrel. I took it all apart, and sent the receiver and bolt to LongRifles, Inc (LRI) to have them do their Tier 2 blueprinting which keeps the OEM threads and includes the following:
The barrel is a McGowan 20” #3 contour SS barrel with 6 straight flutes, with an 11-degree crown, threaded 5/8-24, and bead blasted matte. The invoice for the barrel is shown below. It has 391 documented rounds down it. The barrel nut is a Patriot Valley Arms barrel nut with the nitride finish.
To round out the build, I added a SS BDL bottom metal that I think is either a Redhawk Rifles, or Hawkins, however all they are showing now is Aluminum ones. This one is SS as you can see from the S stamped on it and the fact that it is magnetic, which aluminum isn’t. The guts of the mag are the Wyatt’s RSA kit which includes a SS factory-length box (2.860” internal length), a machined follower, and spring. Action screws are RedHawk SS hex head screws.
The trigger is a Trigger Tech Primary.
It will come with a set of Hornady new dimension dies and 97 pieces of Starline brass that have been fired in this rifle 3 times, the brass will come tumbled and annealed (using my Ugly Annealer). It will also come with the EGW 0MOA rail and a Downrange Products thread protector that are on it. Total weight as pictured is 5 pounds 2.5 ounces.
I have included a bunch of pictures below, however I encourage a potential buyer to reach out via PM where we can swap phone numbers and have a video or Teams call so that I can answer any additional questions and give you real-time pictures.
Price is $1100, shipped to your FFL (must accept from an individual).
Also for sale are 100 new pieces of Alpha Munitions 260 Remington LRP brass. It is unopened in the ammo box that it comes in. Price is $100, shipped to your door.
The final item I have for sale is a Stocky’s fiberglass hunter stock. It is precursor to the Next Gen Carbon Fiber Hunter stock. It weighs exactly 2 pounds and is blue and black in finish. It has two sling swivel studs up front and one in the rear. It also has aluminum pillars. The barrel channel is a heavy sporter and has been opened up to accommodate a PVA barrel nut. I had my Remage 7TCU with a Wilson #4 barrel in it, but that rifle is now in the Pure Precision (Mesa) Altitude stock that the 260 Rem from above was in. Price for this is $225, shipped.
This one started life as a Walmart special ADL with a 243 barrel. I took it all apart, and sent the receiver and bolt to LongRifles, Inc (LRI) to have them do their Tier 2 blueprinting which keeps the OEM threads and includes the following:
- Single Stroke Diamond Honed ID receiver bore
- Reconditioned Receiver Lug Abutments
- Bolt nose resurfaced
- Bolt face resurfaced
- Bolt Lugs resurfaced
The barrel is a McGowan 20” #3 contour SS barrel with 6 straight flutes, with an 11-degree crown, threaded 5/8-24, and bead blasted matte. The invoice for the barrel is shown below. It has 391 documented rounds down it. The barrel nut is a Patriot Valley Arms barrel nut with the nitride finish.
To round out the build, I added a SS BDL bottom metal that I think is either a Redhawk Rifles, or Hawkins, however all they are showing now is Aluminum ones. This one is SS as you can see from the S stamped on it and the fact that it is magnetic, which aluminum isn’t. The guts of the mag are the Wyatt’s RSA kit which includes a SS factory-length box (2.860” internal length), a machined follower, and spring. Action screws are RedHawk SS hex head screws.
The trigger is a Trigger Tech Primary.
It will come with a set of Hornady new dimension dies and 97 pieces of Starline brass that have been fired in this rifle 3 times, the brass will come tumbled and annealed (using my Ugly Annealer). It will also come with the EGW 0MOA rail and a Downrange Products thread protector that are on it. Total weight as pictured is 5 pounds 2.5 ounces.
I have included a bunch of pictures below, however I encourage a potential buyer to reach out via PM where we can swap phone numbers and have a video or Teams call so that I can answer any additional questions and give you real-time pictures.
Price is $1100, shipped to your FFL (must accept from an individual).
Also for sale are 100 new pieces of Alpha Munitions 260 Remington LRP brass. It is unopened in the ammo box that it comes in. Price is $100, shipped to your door.
The final item I have for sale is a Stocky’s fiberglass hunter stock. It is precursor to the Next Gen Carbon Fiber Hunter stock. It weighs exactly 2 pounds and is blue and black in finish. It has two sling swivel studs up front and one in the rear. It also has aluminum pillars. The barrel channel is a heavy sporter and has been opened up to accommodate a PVA barrel nut. I had my Remage 7TCU with a Wilson #4 barrel in it, but that rifle is now in the Pure Precision (Mesa) Altitude stock that the 260 Rem from above was in. Price for this is $225, shipped.
