223 subsonic

mtbraun

Lil-Rokslider
Joined
Jul 6, 2023
Messages
100
Looking for a starting point on working up a subsonic .223 load for an AR. Appears to be challenges with a small bullet like this, building enough case pressure, and perhaps also getting rifle to cycle. Obviously hoping to avoid a catastrophic failure with a stuck bullet. I was planning on using a 53 gr. V-Max. Thank you.
 

Axlrod

WKR
Joined
Jan 8, 2017
Messages
1,464
Location
SW Montana
Hodgdon has sub's on their load data site.
55 gr bullet/ 3.1 gr. Tightgroup = 1064 fps

To avoid trouble always start higher with subs, and work your way "down" to subsonic velo. Also shoot paper targets @ 25 yds to make sure bullets are not tumbling, before screwing on your can.
 

Vern400

WKR
Joined
Aug 22, 2021
Messages
495
Trail Boss. Fill the case to the neck and shoot it across a Chrony and back off as needed. You might have to drill your gas hole. One way street there. You can probably get 50 gr subs in rimfire. Wonder why the light bullet but don't care. Sounds like fun.
 
Top