I loaded about 50 shells with this when my kid was smaller and we shot more 20 ga. It's all good as new. Reply with name and number if you'd like a response; looking for $50 TYD CONUS.
From the Web:
The Lee Load-All 2 offers the reloader a an inexpensive option when it comes to making cost effective shotgun shells. This press includes eight shot bushings that measure 7/8, 1, 1-1/8, 1-1/4, 1-1/2, 1-3/4 and 1-7/8 ounces. The 1-7/8 ounce bushing is a small tab that fits inside the charge bar. Also included with this press are sixteen powder bushings that measure: 095, 100, 105, 110, 116, 122, 128, 134, 141, 148, 155, 163, 171, 180, 189 and 198 cubic centimeters.
Unlike other more expensive presses the Lee Load-All 2 also comes with 6 and 8 point crimp starters, safety charge bar, steel sizing ring, aluminum plate for primer catcher, spare wad guide, primer guide, spring and pin, one screw and two bolts with locking nuts. Additionally the 12 and 20 gauge models can load 3" shells without needing an expensive conversion kit.
Shell Length: 2-3/4", 3"
Priming Feature: Single priming the reloader has to place the primer in the press, there is an optional primer feeder available separately
Priming Feature: Single priming the reloader has to place the primer in the press, there is an optional primer feeder available separately
Comes with 6 and 8 point crimp starters
Safety charge bar
Steel sizing ring
Aluminum plate for primer catcher
Spare wad guide
Primer guide
Spring and pin
One screw and two bolts with locking nuts.
Charge Bar Shot Weight: Comes with 8 shot bushings
Bushings included measure 7/8, 1, 1-1/8, 1-1/4, 1-1/2, 1-3/4 and 1-7/8 ounces
Powder Bushings Included: Yes
Included bushing measure 095, 100, 105, 110, 116, 122, 128, 134, 141, 148, 155, 163, 171, 180, 189 and 198 cubic centimeters
Gauge Conversions Available: Yes
Comes with 6 and 8 point crimp starters
Safety charge bar
Steel sizing ring
Aluminum plate for primer catcher
Spare wad guide
Primer guide
From the Web:
The Lee Load-All 2 offers the reloader a an inexpensive option when it comes to making cost effective shotgun shells. This press includes eight shot bushings that measure 7/8, 1, 1-1/8, 1-1/4, 1-1/2, 1-3/4 and 1-7/8 ounces. The 1-7/8 ounce bushing is a small tab that fits inside the charge bar. Also included with this press are sixteen powder bushings that measure: 095, 100, 105, 110, 116, 122, 128, 134, 141, 148, 155, 163, 171, 180, 189 and 198 cubic centimeters.
Unlike other more expensive presses the Lee Load-All 2 also comes with 6 and 8 point crimp starters, safety charge bar, steel sizing ring, aluminum plate for primer catcher, spare wad guide, primer guide, spring and pin, one screw and two bolts with locking nuts. Additionally the 12 and 20 gauge models can load 3" shells without needing an expensive conversion kit.
Shell Length: 2-3/4", 3"
Priming Feature: Single priming the reloader has to place the primer in the press, there is an optional primer feeder available separately
Priming Feature: Single priming the reloader has to place the primer in the press, there is an optional primer feeder available separately
Comes with 6 and 8 point crimp starters
Safety charge bar
Steel sizing ring
Aluminum plate for primer catcher
Spare wad guide
Primer guide
Spring and pin
One screw and two bolts with locking nuts.
Charge Bar Shot Weight: Comes with 8 shot bushings
Bushings included measure 7/8, 1, 1-1/8, 1-1/4, 1-1/2, 1-3/4 and 1-7/8 ounces
Powder Bushings Included: Yes
Included bushing measure 095, 100, 105, 110, 116, 122, 128, 134, 141, 148, 155, 163, 171, 180, 189 and 198 cubic centimeters
Gauge Conversions Available: Yes
Comes with 6 and 8 point crimp starters
Safety charge bar
Steel sizing ring
Aluminum plate for primer catcher
Spare wad guide
Primer guide
Attachments
Last edited:
