Search results

  1. hdc77

    WTB Aero solus action wrench

    Happy to lend you mine if you pay postage.
  2. hdc77

    22 Creedmoor H4350 starting point…

    Ill add here as well, I pressured out with H4350 and 80 grain bullets way bellow 42 gr, I ended with 39.0 gr and 3100 on a 20 inch barrel. I switched to H4831SC and went up to 42 gr achieving 3200 fps. As usual, proceed with caution.
  3. hdc77

    Sold Triggertech Diamond Single Stage Flat FS

    Pm sent
  4. hdc77

    Arbor press/ inline dies worth it?

    I am not sure it make better ammo but I do love my arbor press, it makes great ammo and I keep track of seating pressure just for kicks. It’s a fun toy, not sure will improve your shooting.
  5. hdc77

    25 PRC

    I found pressure with H1000 around 60.5 but just ejector marks, no bolt lift etc. with RL26, I found pressure around 58.5, its smoking fast but only have 2 pounds left so did not pursue it afterwards.
  6. hdc77

    25 PRC

    That sounds on point, I did it almost exactly as you are planning. This was my load data , please remember all rifles are different.
  7. hdc77

    7 PRC reloading experience

    Mine has the AW chamber so no clickers so far. Super easy to load, ADG brass and 180 Bergers HT shoot super accurate with CCI 250 and H4831SC. I’m at 2940 fps out of a 24 inch barrel.
  8. hdc77

    Which bullet would you choose

    I have used those in a 300 wsm I used to run, they kill well but meat damage was a bit more than I have gotten with Bergers if you hit bone.
  9. hdc77

    WTB B&C Tikka stock

    I have one, BC M40 stock, spot bedded for tikka action, barely used, takes a heavy barrel PM me if you want pictures.
  10. hdc77

    Sold Solus/C6 6CM

    SPF
  11. hdc77

    25 prc? 25-7 prc? Experiences? Gotchas? Intangibles?

    I agree is slow, I started at 55 gr h1000, 24 inch barrel @3050 fps with 134s
  12. hdc77

    25 prc? 25-7 prc? Experiences? Gotchas? Intangibles?

    If you want a modern fast 25 you won’t regret it!
  13. hdc77

    25 prc? 25-7 prc? Experiences? Gotchas? Intangibles?

    Forgot to add, I used 6.5 PRC dies, and for the seater I just bought a 25 caliber seating stem, but you don’t really need it.
  14. hdc77

    25 prc? 25-7 prc? Experiences? Gotchas? Intangibles?

    Super easy conversion on virgin brass, one pass on a Redding bushing die with a .283 bushing or something similar depending on what neck tension you want. I have a 6 Saum reamer from JGS, and a 6 PRC as well, but haven’t started that project. I did have a 6 Saum briefly on a tikka action, 20...
  15. hdc77

    25 prc? 25-7 prc? Experiences? Gotchas? Intangibles?

    I built a 25-6.5 PRC, absolute hammer, 24 inch Hart barrel, used a Short MacBros action, ended up selling because my squirrel brain can’t stay put, and wanted to build a 6 Saum. You will achieve those velocity numbers for sure. Here’s my load data, of course only safe in my rifle. This was with...
  16. hdc77

    Sold Solus/C6 6CM

    Here you go folks, 20 inch barrel, sendero contour. Don’t have a scale at home but the Solus action is not a super light one and the ATACR on top doesn’t help. Thanks
  17. hdc77

    Sold Solus/C6 6CM

    Selling a rifle I got from a friend who needed $. Solus action, 6CM with C6 1:7.5 twist, sendero contour, 5/8x24 prefit barrel. It will come with a TT special curved. It seats on a McMillan stock I had at home, not bedded, can't recall brand of the M5 DBM. Stock was modified by me to fit the...
  18. hdc77

    Sold Vortex Fury HD

    Bump, OBRO
  19. hdc77

    Is my PRC slow?

    I think you’re right where you should be, my load of 140s and H1000 out of a 22 inch barrel runs at 2950 with 58 gr. I found pressure not far from that.
  20. hdc77

    Sold Vortex Fury HD

    Selling a used Vortex Fury HD, Non-Ballistic, no box. I've used this Binos for 2 years and they work well. They'll ship In the soft vortex case they come with. $650 shipped TYD. Crossposted, Thanks

Latest posts

Featured Video

Stats

Threads
354,884
Messages
3,746,514
Members
81,011
Latest member
deerfarmer

Latest Articles

Top