Search results

  1. Tremain4414

    Epoxy River Table

    I picked up this Rubio Monocoat stuff after watching a bunch of pro videos and recommendations. I think I’ll start with that and see how it does
  2. Tremain4414

    Epoxy River Table

    Table update. Got the top of the table completely routered and flattened. Overall it worked pretty well and I think it turned out alright. I flipped the table back over and found a crack. Damnit lol. The crack is about 10” long and right along the edge of the epoxy/wood. Still haven’t quite...
  3. Tremain4414

    WTS Christensen MPR 300 Norma

    Bump
  4. Tremain4414

    WTS Christensen MPR 300 Norma

    Bump
  5. Tremain4414

    WTS Christensen MPR 300 Norma

    Bump
  6. Tremain4414

    WTS Christensen MPR 300 Norma

    Price drop- $1600
  7. Tremain4414

    WTS Christensen MPR 300 Norma

    Bump
  8. Tremain4414

    WTS Christensen MPR 300 Norma

    Price drop- $1700
  9. Tremain4414

    WTS Christensen MPR 300 Norma

    Bump
  10. Tremain4414

    Epoxy River Table

    Yeah I’m running off memory but I believe it was about 72 hours or so before it became tacky. If you’re looking at doing the river style table you definitely want to get the deep pour stuff. The regular epoxy gets way hotter and will discolor and crack if you try and deep pour it. I did use the...
  11. Tremain4414

    Epoxy River Table

    Hahaha I appreciate all the feedback and comments. I promise you I’m not normally this level headed. There were numerous times during this project that I had to walk away and leave that thing sitting for weeks before I could get back at it
  12. Tremain4414

    Epoxy River Table

    Also this is the route bit I finally found that worked best for me for those who are curious. Guess it’s 2.5” but so far it’s leaps better than anything else I’ve tried
  13. Tremain4414

    Epoxy River Table

    I think I went through two bottles of this stuff, a little goes quite a ways And I ordered 8 of these, I ended up using 6.5 of them and used the rest to make a charcuterie board for my wife and one for a friend as a house warming present
  14. Tremain4414

    Epoxy River Table

    After getting the bottom of the table sanded down, (I started with 60 grit and moved my way up to 150 for the bottom, I’ll likely go to 220 on the top), I routered in four channels for the metal U pieces in the picture above. I drilled holes and set them into the table then flipped it over to...
  15. Tremain4414

    Epoxy River Table

    I let the table sit for about 3 weeks or so before I even tried to move it. I eventually got up the courage to try and remove the form. The sides popped off no issue, likely due to the tyvex tape but as I mentioned before the lack of form release or tape on the bottom cause it to be solidly...
  16. Tremain4414

    Epoxy River Table

    Alright so continuing on….the next major self inflicted issue I had was the expoxy pour itself. I don’t have a shop or anything like that and was basically carving out space in my already cluttered garage to do this project. In my infinite wisdom I decided that two plastic folding tables side by...
  17. Tremain4414

    Epoxy River Table

    I didn’t, but there’s four metal U shaped brackets I routered in on the bottom side and one of them is screwed into that floating crack so I think it’ll be alright? I’m honestly kind of winging most of this based on my extremely limited woodworking skills and YouTube lol If you zoom in on the...
  18. Tremain4414

    Epoxy River Table

    When it’s all said and done and I trim and router the edges it should be 84” long and 40” wide. A buddy of mine knows a local guy who fabricates and sells table legs and bases. Were going to go with this style
  19. Tremain4414

    Epoxy River Table

    This project has been in the works for about 7 months now. It all started while my wife was browsing Pinterest and found some pretty cool epoxy river tables that someone was building and selling. Now our current kitchen table is a $25 deal we found at goodwill, including 6 chairs. I sanding...
  20. Tremain4414

    WTS Christensen MPR 300 Norma

    For sale only please, not interested in any trades, and I’m pretty firm on price. Rifle has approximately 140 rounds through it and I have the once fired brass. Rifle shoots great, loves everything I’ve gave it. I have another of the exact same rifle in 300 PRC tho and a custom rifle being...

Latest posts

Featured Video

Stats

Threads
322,846
Messages
3,389,776
Members
75,093
Latest member
Tclawson

Latest Articles

Top