Search results

  1. I

    Custom Gun Into Canada

    I'd call the Canadian border service guys from a pay phone. Lol good luck getting it across the border. Our gun laws are ridiculous.
  2. I

    What are you using in your tumbler for high polish brass?

    I have a frankford vibratory tumbler, I throw it on at night and let it go til morning. It's got a mix of two types of Lyman crushed walnut, they come out bright as can be, no extra added stuff.
  3. I

    HPG Shepherd Stove

    I can second this, it's a slick setup. If he comes out with an 18 inch long version I'll be purchasing that as well.
  4. I

    The Shoot2hunt Podcast

    Is there a way to use a John Daly voice filter for Form?
  5. I

    Does my freebore look weird?

    They chamber and extract nicely, still rub in one spot but, it's very light scuffing.
  6. I

    Does my freebore look weird?

    So I did the bronze brush with some solvent with a drill and it came out sparkling. I definitely noticed the bronze brush taking away the carbon with the bore scope, should have taken photos.
  7. I

    Does my freebore look weird?

    What is this device called? It is a solvent trap?
  8. I

    Does my freebore look weird?

    Thanks for the replies, think I'll try a good cleaning and go from there.
  9. I

    Does my freebore look weird?

    I don't know how you would sharpen it without changing dimensions. Is there a way for a smith to measure the dimensions of the throat to see if it is in fact undersized?
  10. I

    Does my freebore look weird?

    Well I'm glad to hear that. It sure hold onto that bullet when it's chambered. Would sharpening the reamer have caused a slightly smaller throat? When I first started loading for this rifle I thought I was in the lands but I'm wondering if it was just the throat now?
  11. I

    Does my freebore look weird?

    It was shooting well, half moa allllllll dayyyy haha, biggest three shot group it ever shot during load dev was just over an inch. Just reallllyyyy tough to eject a loaded round. I will definitely try some of that stuff mentioned above. Wipeout/patch out says it takes out carbon but who knows...
  12. I

    Does my freebore look weird?

    I use patch out, put a couple soaked pads down the barrel, sit over night and then dry patches. Couple more wet ones go through, sits for an hour amd they come out clean. I'm also not convinced it's carbon by the way it looks. Almost looks like rifling that wasn't cut down all the way in the...
  13. I

    Does my freebore look weird?

    It's the same with a fl sized. Took before and after one chambering.
  14. I

    Does my freebore look weird?

    Yes, I was. With FL sized brass, this is neck sized. Maybe I'm crazy, I'll full length size one and try it at 2.450 and report back.
  15. I

    Does my freebore look weird?

    It's got 200 and change on it.
  16. I

    Does my freebore look weird?

    I covered one in sharpie. Also, along with being hard to chamber, it's quite tough to extract and pull the bolt back and eject the round
  17. I

    I have never seen anything like it

    I watched a guy burn 3 boxes through a 270 one time. He got to within 10 feet of a 2x3ft target before hitting it. I thought he was just trash haha but his rings were mounted backwards on a x bolt.
  18. I

    Does my freebore look weird?

    Was having some trouble with some handloads for my 7 wsm, it's on a long action 700. Provided a dummy round to the gunsmith. 175gr berger elite hunter seated with boattail junction seated at neck shoulder junction. Measured 2.450 cbto with comparator. Had rifle about two years now and have been...
  19. I

    Tire Plug - Temporary or Permanent

    My buddy and I put a plug in a tire on his f350 three years ago. It's still in there haha, its in the middle-ish of the tread nowhere near a side wall. I'd run it til its time for new tires
  20. I

    POA being disregarded to accuracy

    What if you don't have one of the three scopes around that will actually return to zero? haha

Latest posts

Featured Video

Stats

Threads
353,645
Messages
3,731,600
Members
80,737
Latest member
Marty2419

Latest Articles

Top