Search results

  1. P

    Tikka XLR Element Lightweight Magazine Options

    So the mdt mag worked in your Tikka chassis? I have an accurate mag still widdling down the feed lips inside cause they scratch the brass so bad. Local shop an a MDT aics mag I thought about trying can't just pop it out an try way packaging is.
  2. P

    7mm prc, how short is too short?

    I hear that. I just got some federal 175s to chrono. I only got 2810 with 180 eldms an 22 inch barrel 2690ish when I went to 18. The 155 feds did 3000 with a 18 inch
  3. P

    7mm prc, how short is too short?

    Just depends on the powder from what I've noticed. I loaded some up with 560 in once fired brass actually .1 grain less then what I'd been running an it was smoking. Average 3013 with 18 inch barrel but it was hot. I'm gonna back er down see where to where speed settle but think I found my...
  4. P

    N560 for 6.5 PRC / 7 SAUM

    162 ELDX at moment I ran out of Ms yeah I didn't expect it like a said hot load lol I'm back in down for sure
  5. P

    N560 for 6.5 PRC / 7 SAUM

    Once fired brass this charge was .1 less than what I'd been shooting wasn't that fast before she was hot....needless to say I'll back it down I was playing from lands to .030 off .010 was best group. Gonna try rl23 1 more time but I'd say I'll probably go with N560
  6. P

    The 22 creedmoor thread

    That's awesome, I like that fluted bolt. I love my Tikka may be my preferred rifle from now on. I never tried mine that tight it seems to like .30 of with 75 eldms. Might try 80s next time I load some. Got some 77 tmks just haven't had the need to try anything. Pretty good for speed for 18 inch...
  7. P

    The 22 creedmoor thread

    Gotcha didn't realize the were that long. Vandals are 18 I think. My next one will be 18 or 20. My Tikka is 22. If you find a fast twist 22-250 can just have it reamed.
  8. P

    The 22 creedmoor thread

    Hmm really? They even said at shot show they were gonna produce ammo I think it was in the rival
  9. P

    The 22 creedmoor thread

    Lol no doubt an I know one that was one an chamber is so tight won't shooting the Texas Ammunition pulls bullets out if you don't shoot. He went to smaller grain hammers I'd sent that thing back
  10. P

    The 22 creedmoor thread

    Horizon or Fierce
  11. P

    7mm PRC short barrel?

    The Polonium was my 3rd for length an rating for a short rifle build. I got a 16.5 inch 7mm-08 it may stay on that thing is hand. I've shot the r2 off my 300 prc an sounded like a 22 mag in the field I laugh after the deer dropped. I will do a lot of research on next can for quietest possible...
  12. P

    7mm PRC short barrel?

    Yeah I'm not unhappy with it. It was shorter so didn't expect quieter. I read his review an listened to his YouTube video after ordering it. I wanted it more for its ruggedness. I put videos up of it compared to the R2 for a short barreled magnum still does very good job. I think the R2 is under...
  13. P

    7mm PRC short barrel?

    YHM Resonator R2. Rated for 20 inch 300 win mag or rum. I just got an Otter Creel Labs Polonium 30 to be safe it's not quite as quiet so I'm running the YHM our gun range is in a hollow under pavilion so need all I can get lol
  14. P

    6.5 prc vs 7mm-08 for 18”-20” barrel

    Savage Lightweight Storm 16.5 inch barrel with YHM R2 suppressor Hornady 139 SST Factory load. Box says 2950 with 24 inch barrel
  15. P

    7mm PRC short barrel?

    That's why I went with a 600 dollar savage figured if I didn't like it with a short barrel wouldn't be out of near as much. 200 to cut down an thread indexed my suppressor adapter off muzzle an recrowned it. Figured I wash pushing limits of what this suppressor was rated for. Browning I believe...
  16. P

    N560 for 6.5 PRC / 7 SAUM

    For sure. I was wanting 2800 from what I seen I figured it was achievable so anything over is a plus. I maybe try the eldx see how accuracy is with them. See if anything changes with once fired brass. Happy with velocity for sure it's gonna be a fun gun I do believe. Be better once I get a...
  17. P

    Short Barrel Suppressed 7s for Elk

    Nice. 69 seemed to be enough for mine bolt lift seemed ok but didn't want to come out of chamber too easy
  18. P

    Short Barrel Suppressed 7s for Elk

    So far I haven't gotten accuracy out of the ELDMs that I'd hoped. I've tried .15 .20 .30 .40 an .50 off lands an they are ok but not tight as I'd like. Have some ELDX may try. May back N560 down a hair see what it does. Hate buying up powder an primers with the expense of stuff now days...
  19. P

    N560 for 6.5 PRC / 7 SAUM

    7PRC with 18 inch barrel. I'm between this an RL23 both have been most consistent with speed that I want. Just have to play with seating depth to gain some accuracy.
  20. P

    Short Barrel Suppressed 7s for Elk

    This was the 155 terminal ascents. I'm playing with seating depth with 162 eldms right now. Narrowed down to 4 powders getting speed I like now trying to see how tight I can get em. Gonna try .40 off went up to .15 an didn't like it. They did ok at .30 about an inch but I wasn't settled on my...

Latest posts

Featured Video

Stats

Threads
352,097
Messages
3,711,217
Members
80,451
Latest member
Calebleonard9

Latest Articles

Back
Top