Search results

  1. JF_Idaho

    How ABSOLUTE LOW must one stoop?

    Wow. That's really horrible. Special place in hell for a scummer like that!
  2. JF_Idaho

    is it my scope or loads? 98% good, 2% fail @ 100 yards

    Mod needs to edit the title to "0% good, 100% fail"
  3. JF_Idaho

    New updated InReach plans -

    Being on the annual safety plan it's cheaper for me to keep it as I rarely go over the allotted messages. I think right now it 11.99 a month and would be 14.99 to go to the comparable plan (with more messages)
  4. JF_Idaho

    Throwing charges, weight variance

    It triples because it round to the tenth. So until you're over .15 it doesn't round to .2 .15 over plus .15 under equals .3
  5. JF_Idaho

    Throwing charges, weight variance

    Just did 23-24gr varget yesterday under a 75eldm 150fps difference. Should be said that with rounding to 1/10gr +/- you are getting up to 3/10 variation in charge weight. So in that scenario roughly 45fps.
  6. JF_Idaho

    Throwing charges, weight variance

    .5% +/- @2700fps would be around 27fps
  7. JF_Idaho

    Normal Velocity Deviation?

    Went back to the data I have written ES 149 FPS Average Per Box 2576 2688 Lot #s 3240075 3230674 (Did not have the data which was which)
  8. JF_Idaho

    Normal Velocity Deviation?

    I think in same lots 40-50fps ES seems pretty normal. I posted recently about 2 different lots of 6.5cm Precision Hunter having a 140fps spread between them. 2560/2700
  9. JF_Idaho

    is it my scope or loads? 98% good, 2% fail @ 100 yards

  10. JF_Idaho

    New updated InReach plans -

    I don't believe you can change them anymore. It changed when they went from preset-check-in.
  11. JF_Idaho

    Inconsistent/not enough shoulder bumps?

    Since you're trying to bump the shoulder I would imagine you have a headspace comparator? Is the fired brass shoulder you're trying to bump longer than saami spec (i.e. the die)?
  12. JF_Idaho

    Inconsistent/not enough shoulder bumps?

    That's really weird. Take the collet out with the stem. That's the only thing that could stop it if the neck was too long (and it would have to be really really long). Other than that the only thing that can stop it is the shoulder itself..... Might have to hit it with your big purse 🤣
  13. JF_Idaho

    New Member: Moving to ID

    Welcome from Star.
  14. JF_Idaho

    Inconsistent/not enough shoulder bumps?

    The shell holder touches the die without a case in it?
  15. JF_Idaho

    Painless load development (mine)

    Fixed my above post where I said Redding. Yes, Forster.
  16. JF_Idaho

    Painless load development (mine)

    @West2East I thought this video was pretty eye opening on the consistency of a Forster FL sizer vs mandrel and/or bushing dies.
  17. JF_Idaho

    Is this acceptable for high end rings? And a couple other questions

    @Marbles I only shoot my rifles that shoot <1/8 MOA groups. Always repeatable 1 shot groups.
  18. JF_Idaho

    Rifle Accuracy Problems

    Action screws or scope rail screws loose?
  19. JF_Idaho

    Is 8208 XBR now a unicorn?

    2750-2800 with the 77/75. 18" barrel. Don't have chronograph data for the 69smk but if I had to guess in the low 2800s. In my data book they were lazers with the accuracy. 20" barrel.
  20. JF_Idaho

    Is 8208 XBR now a unicorn?

    Their load data for that bullet has OAL at 2.140" I run 23.4 for 75/77 grain and 23.6 for 69 smk. 2.250-2.260".

Latest posts

Featured Video

Stats

Threads
351,826
Messages
3,708,165
Members
80,415
Latest member
TMac101

Latest Articles

Top