Cam lean looks fine now and yokes aren't touching the cams at all through the draw cycle. I'm thinking I may have put the top hats on backwards after knocking them out when pulling the bottom axel.
I just tested a bare shaft and a fletched arrow at 10 yards and ruined an arrow...
Pins aren't...
Just to be sure, you’re saying the donut is 90 to the yoke? Or the donut is 90 to the main string?
And if the main string, how do you adjust that? Take twists in or out of the cables?
Sent from my iPhone using Tapatalk
Yea. Even pulled the yokes and realigned them several times. After adjusting and checking, it was still rubbing on the cam at draw.
Sent from my iPhone using Tapatalk
Thanks for the info. I pulled the strings and cables and measured and they all passed the eyeball test. Biggest thing was making sure the yokes and cables were equal length and the appear to be.
Restrung and same result at full draw. I then swapped the top hats around on the bottom cam and it...
Have a similar issue with my VXR. This is the second set of strings I’ve put on this bow, but first time encountering the yoke touching the cam at full draw after checking in my draw board. I’m curious if the top hats resolved your issue or if there’s anything else I should try.
Bow is...
Been using the 1p for the last 2 seasons and it’s got a ton of room. For reference, I’m 5’9” and around 170lbs. Plenty of room inside, plus the double vestibules, I don’t feel limited on space at all.
Sent from my iPhone using Tapatalk
Interesting. I hadn't considered a 10* bag, but I like that you have experience down to 0*. I'm a warm sleeper so I think that could be good for me. The issue I think I'll have is use during CO archery. Does the VersaLite breath well?
I went from a slider back to a fixed pin, but more because of where I hunt the majority of the time. East of the Mississippi, I don't generally have to take a shot over 35-45 yards and it's nice not having to dial in the sight. The downside is I can't reach out beyond 65-70 yards confidently...