Search results

  1. O

    WTS Pulsar Digex n455

    Up
  2. O

    WTS Pulsar Digex n455

    Bump
  3. O

    WTS Pulsar Digex n455

    Reduced again I have a very lightly used digex n455 for sale, everything that came with it new is included even the box. I used it about 6-8 times then I got a back fusion surgery, since I retired and went full thermal, much more expensive. This unit is like new, works great with no issues. $650...
  4. O

    good barrel for Browning 3006 A-Bolt 2 stainless

    Yes I have 3006 components and dies. I like the 06 it is right inbetween the 308 and 300win mag, my loads 180gr hornady interlock SPBT are at 2800fps and shooting 3/4" groups. I tried the 180gr accubonds just didn't do as well and the availability steered me away. As for my elk hunt 12" of snow...
  5. O

    Maybe the lowest priced option to benchmade altitude

    If you look at the sheath the bottom part of the blade is were it snaps in, just be careful not to trim out that area.
  6. O

    Maybe the lowest priced option to benchmade altitude

    Yes it snaps in the same as before I trimmed it, just have to guide it into the sheath a little more carefully as the opening isn't as wide.
  7. O

    Maybe the lowest priced option to benchmade altitude

    I bought one, thanks sndmn11,lol. I liked the ones you did so much I decided to do mine. I had walnut flooring scraps and a couple old ignition #6 machine screws and locknuts on hand so I used what I had on hand including linseed oil. I used a table saw to slice the flooring piece thin for the...
  8. O

    Critique my Backpack Hunt Gear List

    Maybe a few more rounds incase your scope gets knocked out of zero you could discharge them before you pack meat out.
  9. O

    Annual physical

    I would say finding out early is better, treatment success much higher. As for us older people I am 66, last month my younger brother died self inflicted alcoholic, this month my father died at 93 active until the first stroke, second one took a huge toll a few weeks and he passed. I conducted...
  10. O

    Sold 180gr 30cal accubonds

    No they still make them, every so often Nosler has them on their site, I got these there, sold them for what I paid, don't like price gougers.
  11. O

    Must have for cleaning optics

    I agree, I learned about rinsing the glass first then while still rinsing using swabs, and no pressure on them, I go the extra step of turning the swab over for the next pass then a new swab etc. I learned this cleaning first surfice mirrors used in telescopes as their coatings are very...
  12. O

    Sold 180gr 30cal accubonds

    That went quick, glad someone gets these in time for this season, my rifle shots them well but the other bullets I loaded up shot 1/2" groups hard to not go with them.
  13. O

    Sold 180gr 30cal accubonds

    I have three 50ct sealed boxes of new 30cal 180gr accubonds for sale, $205+15 shipping PP ff conus only.
  14. O

    Must have for cleaning optics

    Be very careful with canned air, if you shake or tip the can it will spray very cold liquid which could damage your coatings. I second water rinsing your glass follow up with wet cotton balls using no pressure swab the lense as you rinse, finally rinse with distilled water and blot dry leaves...
  15. O

    good barrel for Browning 3006 A-Bolt 2 stainless

    Thanks, I am too. My first elk hunt is this fall so getting the rifle done in time was the most important consideration.
  16. O

    good barrel for Browning 3006 A-Bolt 2 stainless

    Follow up on getting a barrel, got a Browning white gold medalion barrel 216$ with tax, had the gunsmith bead blast it and the action to match. It was short chambered so he finished it. I finished breaking it in, it copper fouls much less than the damaged barrel, and so far with my 180gr...
  17. O

    Storing powder?

    I set up a fire resistant room, had contractor poor an extra couple walls and 6" top, put in a drain and a fire door. Cheap as a couple safes, put a dehumidifier in it, shelves bench and desk, keeps kids out and never had any problems with primers. Go an extra step put the primers in a cooler...
  18. O

    WTT Meostar 2.5-15x56 RD PA BDC-3 ret.

    Bump
  19. O

    Where to get brass annealed?

    Look at Annealeez machine or AGS once you get the time set properly you can get a good anneal, not perfect as a 1500$ amp machine but very good and far better than not doing it.
  20. O

    good barrel for Browning 3006 A-Bolt 2 stainless

    It was 3006, I agree the action is fine 60* bolt throw is nice just not alot of stocks for them.

Latest posts

Featured Video

Stats

Threads
349,192
Messages
3,677,850
Members
79,879
Latest member
BiggusRickus

Latest Articles

Top