Search results

  1. A

    Truck Batteries

    Pretty sure my Super Start Platinum AGMs on my Deisel are just about done. Made it a little less than 4 years. But my truck has been mostly sitting the last 3 years, I started and drove it once a week.
  2. A

    700 footprint, non-90 degree?

    Kelbly Nanook is another option, they have them in 75* & 90*
  3. A

    The 22 creedmoor thread

    Peterson brass has less capacity so data is going to be slightly different. But I agree the differences with rl26 and superformance seem vastly different with the 75gr. Maybe just the difference between barrel bore diamters .218vs.219, freebore difference, different powder lots, difference...
  4. A

    25-7prc or 25 saum

    Just called WTO they answered on the first ring. Asked about the 25-7prc but they said Clayton was out shooting at the moment and he has all that data on it. Here’s the number 432-312-6132
  5. A

    25-7prc or 25 saum

    Clayton at West Texas Ordinance has a reamer.
  6. A

    What are your 16” 223 Speeds?

    Tikka t3 lite 223rem 16” LC brass 24gr Varget Rem no7 COAL 2.425” +.013” 80gr ELD 2640fps
  7. A

    The 22 creedmoor thread

    That’s with Peterson brass With Hornady or alpha they run 3070 it’s only a 100fps diff. But give the creed a 20” Bbl and it becomes 2930fps vs 3250fps. Guys that have shot out multiple 22br barrels in prs running them with 88s & 90s seem to pull them around 3k but they’re still shooting though...
  8. A

    The 22 creedmoor thread

    I I agree my next creed barrel will be around 20”. It had me thinking the other day shooting the 80s out of my 18” 22creed at 3050 vs 2930 out of my 20” 22arc. 800 vs 3500rd barrel life. Like you I have smaller 22cal hunting rifles so it makes more sense to go 20” with the creed, I’ll still be...
  9. A

    The 22 creedmoor thread

    This was the worst part I could find about 1.5” past the throat. Reamed out factory blued tikka barrel. 450rounds, 400 of those being h1000 & 80gr eldms and the rest with varget and 62s&69s.
  10. A

    The 22 creedmoor thread

    223rem 16” 2650fps/Varget 24gr 22ARC 20” 2930fps/Varget 28.5gr Both mild loads. With the 22arc I was at 3020fps with varget and tested a Hornady case that easily got 10xs. This is seated deep in the case at 2.235 coal to fit in an AR mag length in a ruger bolt gun. And looking at Hornady’s bolt...
  11. A

    The 22 creedmoor thread

    22creed 16”, 8 twist, 100yd zero 80gr eldm 3050fps 75gr eldm 3100fps 10mph 3cl 1000yds Applied Ballistics Solver 0ft DA 75s Drop 24.9moa Drift 6.7moa 80s Drop 24.5moa Drift 6.2moa 6000ft DA 75s Drop 22.2moa Drift 5.2moa 80s Drop 22.1moa Drift 4.8moa Shooting both out of my 16” 223rem and...
  12. A

    The 22 creedmoor thread

    I’d see how they shoot after barrel breaks in. I’ve switched almost everything to the 80elds. For your purposes they have almost the same drops and retained velocitys out to 600 and the 80s at 600 have a tad less wind drift with more energy. I’d go with which one shoots best and if they both end...
  13. A

    22 ARC

    That’s pretty much the same reason I got mine. So I didn’t burn up my 22CM before hunting season. I’ve had the ruger for almost a month and put close to 500 rounds through it.
  14. A

    The 6UM

    Sounds like your on the right track of thinking. At 500 yards 10mph from 3cl wind drift is 1.3” or .2moa difference. Not even 1click/.25moa Regarding fire formed brass, Il go into more detail. I also get great accuracy from certain factory ammos and while forming virgin brass with handloads...
  15. A

    The 6UM

    I’m no expert so take this as opinion. Plain and simple it raises your hit percentage slightly all things being equal. The further the distance the more obvious it becomes. A little less wind drift along with less drop which gives you more room for error ranging animals on flat terrain or in...
  16. A

    22 ARC

    Just necked down a pc of Hornady 6.5 Grendel in one step, Neck thickness is .0155” Hornady 22arc neck thickness is .0135” Formed it in my rifle then resized it and shot again with no issues. But other chambers may have less clearance. Neck on a loaded factory 22arc round is .248” With the 6.5...
  17. A

    22 ARC

    I’m not sure. I would try it and see if I could but I only have a FL die for my 6.5 Grendel. But from looking at the Sammi drawings I don’t see an issue unless the necks came out to thick. I need to neck down a pc of Grendel brass and see what the neck thickness ends up at
  18. A

    22 ARC

    https://kakindustry.com/oe-spec-22-arc-ar15-barrel-12-5-nitride/ Post velocities if you get one please. I’ve been wanting to switch out my 6.5 Grendel barrel also.
  19. A

    22 ARC

    I’ve been comparing the 80gr elds in my 223,22arc,and 22CM. Aside from bolt face the arc has a lot going for it. If your a reloader you can go 22br it’s pretty much the same performance on a .473 bolt
  20. A

    .243 for moose

    I know a guy in South Texas who guided thermal/NV Nilgai night hunts for years. He was showing me all his night rigs one day and I asked him what his favorite one was for him and his clients to use. He picked up a 300blk out bolt gun 16” I was a little surprised. No telling how many they...

Latest posts

Featured Video

Stats

Threads
349,142
Messages
3,677,164
Members
79,868
Latest member
Johnuyhfdaller

Latest Articles

Top