Search results

  1. S

    Is 8208 XBR now a unicorn?

    Yeah and it's 90+ * here., hot as hell. I plan on rechecking when things cool off in the 60's and 50's and see.
  2. S

    Is 8208 XBR now a unicorn?

    Another set. Got velo numbers also. This 8208 gives some ridiculous ES/SD and velo from a short barrel. Bolt lift was as if it is factory walmart ammo. Was checking pressure again but decided to load a few to get some more velocity numbers. 1 case from each appear to have an ejector circle. But...
  3. S

    Is 8208 XBR now a unicorn?

    I use a magnifier app on my phone. Had this app because if I forget my glasses, I could read menu's at a restaurant. The app also has a camera built in. So when I zoom in, it get it real clear, then take the pic through the app.
  4. S

    WTT Credo Hx 4-16x50 for Tenmile 4-24x50

    I currently have a Trijicon Credo Hx 4-16x50 and looking to possibly trade Credo + cash for a 4-24x50 tenmile. The credo is mounted on my CTR and currently only has 5 shots on it. Looking to trade due to the illumination. It appears that the 4-24x50 tenmile has just the center dot that will...
  5. S

    Is 8208 XBR now a unicorn?

    Ok, check me out guys. Finally got to try these out. 44, 44.5, 45, 45.3 (book max) & 45.6, CCI-200, seated to 2.216" CBTO or about 2.835". No heavy bolt lift, all cycled perfectly fine. Rifle is 20" CTR. I have found that this CTR doesn't show pressure like mt T3 lite. My Varget load for...
  6. S

    Tikka help

    The difference is the hx is moa and thr other is mil. No like it a lot. Light for it's size, tracks good so for. Glass is very good. I ended up finding it here for sale for about $800 if I remember.
  7. S

    Tikka help

    4-16x50 hx with red moa
  8. S

    Seating depth and pressure

    Thanks for the links. Couldn't make out the pic.
  9. S

    Is 8208 XBR now a unicorn?

    Nice. Now that the hurricane has passed, the local range will open back up Tuesday. I have some loaded to check for pressure. Book max is 45.3, have one loaded just pass max at 45.6. Best of all, no crunch like varget. Well soon see. I have 1lb, but if it shoots well I'll pick up a few lbs...
  10. S

    Seating depth and pressure

    Man, that's good information. I'll have to look into that read.
  11. S

    Seating depth and pressure

    I am by no means an expert but do understand, so I think, of how seating depth effects pressure. So please correct me if any of this sounds waaaayyyy off. 1) a bullet close or into the lands, depending on if close to max load, can and will produce pressure signs. Bullet doesn't get a running...
  12. S

    How much bearing surface is needed

    Yeah I'm was gonna try the 8208xbr this week but now it looks like I'll get hit with this tropical storm in the gulf and tons of rain. I'll just have to see if weather allows.
  13. S

    SWFA 3-15 TO84 or UM ring height

    I have med rings on my CTR with a 4-16x50 credo.
  14. S

    Browning A-Bolt Barrel Swap?

    It's actually very easy to do. The bottom of the mag has a removable floorplate. Remove the floorplate and pull the spring and guts out the bottom. I used a chainsaw file and Dremel with carbide burr bit. 1) stack 2 rounds in the mag and mark on the with a sharpie where the tips are. Then...
  15. S

    What's your most accurate hunting rifle?

    you beat me to it. Except I still have mine. Those older abolts like the older 700's were fine shooting rifles. I really think browning screwed the pooch with the AB3.
  16. S

    Browning A-Bolt Barrel Swap?

    I considered this a while back. But even with all my Tikka's and Rem 700's, this 1994 Abolt II medallion is still the most accurate rifle I own. I had never played with the Boss system before until just this past year. I thought it shot well until I started loading for it. Another thing...
  17. S

    Tikka T3x superlite -- what to improve and mod?

    I kept stock barrel length, had it threaded 9/16x24 and installed a MBM super baby beast. Shoots like a 243 now. Have changed out the scope and rings, but the Brake is nice.
  18. S

    How much bearing surface is needed

    I'm looking to see if I can get a little more velocity out of my 20" CTR 308. Currently I'm using 155 scenar, 47.5g Varget, CCI-200, R-P brass, 2.810", 2840fps avg. This load shoots very well but is also a good bit compressed. I do however have 1lb of 8208xbr left and after talking to the...
  19. S

    What's your most accurate hunting rifle?

    Exactly !!! 1994 Browning Abolt II Medallion 7 mag with Boss system with the old 1:9.5 twist. Still the queen of my safe. I do have several Tikkas that shoot very well also, but this old baby still shoots great.
  20. S

    Tikka help

    IMO, the Tikka stock is very nice compared to some other tupperware stocks. Put a limbsaver on it and a Victor cheek riser and spend all that money you were gonna spend, on ammo and gear. But thats just me.

Latest posts

Featured Video

Stats

Threads
341,620
Messages
3,594,623
Members
78,504
Latest member
BGhunter92

Latest Articles

Top