Search results

  1. therealthor1

    Browning X-Bolt 300 WM Reloading

    @tstith As follow-up, I was able to verify in the Hornady Rifle Bullet Guide on their reloading app that the muzzle velocity range for both the 200 and 212 gr ELD-X's is 2000-3100 fps. Therefore, I will continue to use my load that measured 2940 fps. That said, I am still curious about the...
  2. therealthor1

    Browning X-Bolt 300 WM Reloading

    @tstith where were you able to find that ELD-X's need to be <=2850 fps leaving the muzzle? To clarify, does that apply to 212 gr bullets and 200 gr? I bought some N565 and had consistently good results, best groups at 74.3 gr. I measured velocity at 2940 fps.
  3. therealthor1

    Browning X-bolt aftermarket stocks?

    Correct. When I was on the phone with Browning, they strongly suggested having a professional do the bedding. I nodded, said sure, and had a buddy who has bedded a few rifles do this for me. I've since taken this rifle to the range--with the new stock and mcarbo trigger spring upgrade, shooting...
  4. therealthor1

    Browning X-bolt aftermarket stocks?

    I got ~2.5lbs with bedding and SRS arca pic installed. Lacking a kitchen scale, that is as precise as I can get. I hope this helps.
  5. therealthor1

    Browning X-bolt aftermarket stocks?

    I'd have to check once I get the rifle back from bedding. You may be able to find that on the internets somewhere.
  6. therealthor1

    Browning X-bolt aftermarket stocks?

    Browning's "Max" stock (vertical grip, cheek riser, etc.) can be purchased directly from their parts department for $210 (~$232 after tax and shipping). You can get black, FDE, OD green, or OVIX camo. It will need to be bedded. Found this out when I called them out of curiosity. Bought the FDE...
  7. therealthor1

    Cheek riser bargain.

    PSA, I would not suggest installing this on an x-bolt unless judicious care is taken--I can confirm that none of the templates provided match up to where the thumbscrews ought to land on an x-bolt. The holes on the side of the stock need to translate downwards ~.5".
  8. therealthor1

    Browning X-Bolt 300 WM Reloading

    Thank you all for the suggestions--looks like I'll have some things to try. H1000 may pose some difficulty to find. I've suspected that that particular powder may be the solution and haven't seen it around much. Regardless, I'll keep an eye out for it, along with the others. On the subject...
  9. therealthor1

    Browning X-Bolt 300 WM Reloading

    Hello all, I've spent some time trying to develop a load for my Browning X-Bolt Max Long Range in 300 WM and have yet to achieve satisfactory results (sub-MOA). I found that 200gr Hornady Precision Hunter ammo yielded the best results from factory ammo, so in essence, that is what I am...

Latest posts

Featured Video

Stats

Threads
341,474
Messages
3,593,168
Members
78,485
Latest member
BigMedicine

Latest Articles

Top